For your convenience, we now stock furniture glides for both hard floor surfaces, such as hard wood and tile, and soft floor surfaces, such as carpet. Perfect for all painters and contractors. Each pack contains four(4) 5 3/4" x 8 1/4" glides which can accomadate most furniture and appliances.
Ideal For Moving: Desks, Refrigerators, Sofas, Entertainment Centers, Beds, Armoires, and much more!
Porter MAXBUILD
A recent addition to our arsenal is Porter Paints Maxbuild Drywall Primer/Surfacer. MAXBUILD High Build Drywall Surfacer/Primer
BENEFITS
Excellent Adhesion
Fast Drying
Easy To Apply
Excellent Flow & Leveling
Superior Uniformity
Good Hiding
(PP5100) is a quick drying, interior, vinylacrylic latex drywall surfacer for use as a first coat on unprimed/unpainted drywall. Recommended for high build spray application over new drywall. The surfacer can be used to replace the typical two-step process of applying a skim coat of joint compound to the finished drywall, followed by a coat of primer. It ensures that the finish coat will have a smooth and uniform sheen. MAXBUILD No.PP5100, when applied according to recommended spread rates, will allow the achievement of a GA-214 ASTM C-840 Level 5 gypsum board finish.
Sto Lotusan®: Dirt runs off with the water that falls on your facade.
Dirt particles are unable to hold on the leaves of the lotus plant and simply flow off with the rain droplets that fall on the plant.
Check Out The Amazing Lotusan Video Below.
AMERON PSX-700
Breakthrough Technology
proven in service
PSX® 700 is a major breakthrough in protective
coatings technology, and like all other Ameron
products, it has been thoroughly tested in the
only way that matters – in service. In fact,
PSX® 700 currently is in service protecting
millions of square feet of valuable assets in a
wide variety of applications, ranging from
corrosive chemical environments to general
maintenance. For specific information about
PSX® 700’s suitability for your particular
application, just give us a call.
PSX® 700 offers a longer
service life than the traditional
epoxy/aliphatic polyurethane
system it replaces.
But when combined with an
inorganic zinc primer (such
as Ameron’s Dimetcote Series
inorganic zinc), the 2-coat
system significantly outlasts the
best 3-coat zinc silicate, epoxy,
polyurethane system.
Significant Cost Savings
Ameron’s PSX® 700 siloxane-epoxy coating delivers dramatic, proven
cost savings in many important ways. Use 1 coat of PSX® 700 to
replace epoxy polyurethane topcoat as part of a system;
or use PSX® 700 over an inorganic zinc silicate primer to replace a
conventional 3-coat zinc silicate primer, epoxy, aliphatic polyurethane
system.
A New Standard In
High-Performance Coatings
Ameron’s patented new PSX® Engineered Siloxane technology is really an entirely new coating category, offering unprecedented improvements in
performance and durability. PSX® 700, an outstanding example of this technology, offers a combination of characteristics available in no other product.
Outstanding Environmental Characteristics
Formulated with very high solids and extremely low volatile organic
compounds (1.0 lbs./gal.(120 g/l) VOC), PSX® 700 meets or exceeds today’s stringent environmental, health and safety requirements––without
compromising performance. And because PSX® 700 needs little or no
thinning, it provides significant reductions in solvent emissions and hazardous waste. Unlike polyurethane, PSX® 700 contains
no hazardous isocyanates. And PSX® 700 provides Class A fire resistance
with low fire and smoke generation ratings to 20 mils (500 microns) DFT.
A faster drying version is also available as PSX® 700FD.
PPG Protective and Marine Coatings - USA Commercial Products
Product Summary for PSX 700
Description
Engineered siloxane
End Uses
Epoxy siloxane coating which replaces epoxy/aliphatic polyurethane system in one coat. Exceptional gloss retention, corrosion resistance, and abrasion resistance. Low VOC. NFPA-Class A, USDA/FDA incidental food contact.
% Volume Solids
90
Recommended DFT
3 - 7 mils
Coverage
289@5 mils
Components
2
Mixing Ratio
4R : 1C
Pot Life @ 70°F
4 hrs
Dry-Through @ 90°F
3 hrs
Dry-Through @ 70°F
6.75 hrs
Dry-Through @ 50°F
8.5 hrs
Dry-Through @ 32°F
24 hrs
VOC
1.0
Art Department
NEW ART STORAGE SOLUTIONS AVAILABLE!
ArtBin Tote Folio
Zippered main compartment holds up to 18" x 24" sketch pad and clipboard, T-squares, etc.
2 Front zippered pockets, each 5"x10" for pencil kits and supplies.
12"x12" Zippered pocket on front for smaller sketch pads and supplies.
Horizontal 6"x27" hook and loop closure pocket on front for longer rulers and rolled documents.
Large 16 1/2"x16 1/2" zippered pocket for additional pads and supplies
2 Comfortable easy grip handles.
Adjustable shoulder strap with shoulder pad.
ArtBin Essentials Three Tray Box
Includes removable dividers to enhance storage capabilities.
Draw-tight latch along with sturdy tongue-and-groove construction.
Tip-Guard™ tray that prevents spills.
ArtBin Upscale Two Tray Box
Stainless Steel links.
Features Tip-Guard™ trays that prevent spills.
Includes paint palette.
Lockable.
Alvin Prestige Deluxe Mesh Bags w/Handles
Alvin® Deluxe Mesh Bags. Ideal for drafting kits, drawings, artwork, documents and much more, these bags offer visibility and protection. Durable see-through vinyl is reinforced with mesh webbing for strength. Features a zippered top, nylon carry handles and an exterior black nylon zippered pocket that is perfect for smaller items. ¾" wide gusset.
Sizes: 12"x16" & 20"x26"
Pencil Tote by SOHO Stuff Management
Unique Design to Stand up Vertically
Built-in Carrying Handle
Durable Socket and Pin Hinges
Secure Double Clasp Design
Framing Department - Check out our new Jonathan Adler Moulding!
Bright colors, bold patterns, and nouveau-chic accessories adorn living spaces touched by Jonathan Adler's unique home-decorating vision. Designing for Larson-Juhl, Adler has transferred his talent for form and shape into two lines of high-quality custom mouldings. Adler's eccentric style brings life to any room.